Interface r.LiNK Input for rear view camera NTSC VW group - MFD3/RNS 510/RCD 510/RNS 315

The r-LINK interface allows the connection of a rear view camera to the vehicle's original radio/navigation equipment, compatible with Volkswagen group vehicles, with radio/navigation systems MFD3/RNS510, RNS315, RNS810, Trinax, Columbus, RCD510 and Bolero with 26pin connector at the equipment's rear.

Main feautures:

• Easy installation interface Plug and play
• Integration at the infotaintment system of the vehicle
  
• Rear view camera input (only compatible with NTSC cameras)
• TV-Free function up to 5 km. hour aprox.
• Automatic switch to the rear view camera input (coding of the equipment is required)

Compatibilities:

• Compatible with all Volkswagen group vehicle models with radio/navigation systems MFD3/RNS510, RNS315, RNS810, Trinax, Columbus, RCD510 and Bolero with 26pin connector at the equipment's rear.
• For vehicles without OEM rear view camera installed.

• OEM TV Tuner: It should not be installed
  

• Aftermarket camera: Only compatible with NTSC cameras

• Coding: The automatic switch function of the camera only will work after coding the equipment through a diagnostic tool or using an OBD activation interface OBD-VW-R-01 (Only possible with version B equipments with 1100 software or higher)

• OPS Parking sensors: On vehicles with OPS (optical parking system) equipment must be coded through a diagnostic tool, or through an OBD activation interface OBD-VW-R-01 (Only possible with version B equipments with 1100 software or higher)