Retrofit kit - Aftermarket Rear View Camera PAS + PDC- Audi Concert/Simphony III with 6.5" display

• Rear view camera interface, specific to integrate the image of an aftermarket camera into the Infotainment system of the vehicle, using the original car’s monitor. Without losing any original function from the infotainment system.
• Wide angle image, showing the rear area in the RMC/MMI display from the camera integrated
  into the rear grab handle.
• Automatic switching of the image when the rear gear is engaged.
• Much easier orientation due to the dinamic guiding lines which are integrated into the video picture.

   Additional features:

• FPG (Flexible Parking Guide) Much easier orientation due to the dinamic guiding lines, integrated into the video picture and change depending on the steering wheel angle.
• PDC (Parking Distance Control) Won't lose the virtual image from factory installed PDC function.

   Compatible with:

• A4 (8K) from 2008
• A5 (8T) from 2008
• Q5 (8R) from 2008

   Requirements:

• Audi Concert/Simphony III with 6.5" display.

   Display's compatible plug:

   The display’s compatible plug is shown at the image below.

• This retrofit set includes a multimedia interface with the vehicle-specific rear view camera.

   Additional features:

• FPG (Flexible Parking Guide) Much easier orientation due to the dinamic guiding lines, integrated into the video picture and change depending on the steering wheel angle.
• PDC (Parking Distance Control) Won't lose the virtual image from factory installed PDC function.

   Technical specifications:

   Inputs:

• 1x RGB
• 3x AV (NTSC and PAL)
• 1x CVBS (for Rear View Camera)
• 1x Vehicle’s monitor connector.

   Outputs:

• 2x CVBS (Video Out)
• 1x Audio L/R

   *Source changing (if installed):

• Steering Wheel “MODE” button.

• Remote controller (included)
• External switch (included)

• Handle with integrated camera
• Interface Multimedia